The Analysis of Plant Location Effectiveness the Study of Sarir Gas Turbine 855 MW Project Site at General Electric Company of Libya

Khaled Emraje Mohamed Elderjy; Djamhur Hamid; Hamidah Nayati Utami

Authors

Khaled Emraje Mohamed Elderjy
Djamhur Hamid
Hamidah Nayati Utami

Keywords:

libya, sarir gas turbine, plant location effectiveness

Abstract

The study presents a reporton Sarir Gas turbine industrial management especially for economical sustainable operation and proper element of plant management due to particularly design of an oil transportation system. It is found that the company is doing relative with some operational challenges and many people in Libya is rely on it and the influence of Government policies and programs on plant locations is quite helpful, particularly in planned economies area.

Downloads

How to Cite

The Analysis of Plant Location Effectiveness the Study of Sarir Gas Turbine 855 MW Project Site at General Electric Company of Libya. (2014). Global Journal of Management and Business Research, 14(31), 25-30. https://journalofbusiness.org/index.php/GJMBR/article/view/

Download Citation

References

AndrewandHERAG KUSIAK, Sunderesh S (1987) The facility layout problem. 29(3), 229-251. https://doi.org/10.1016/0377-2217(87)90238-4

Brush, Thomas. Maritan, Catherine. Aneel (1999) THE PLANT LOCATION DECISION IN MULTINATIONAL MANUFACTURING FIRMS: AN EMPIRICAL ANALYSIS OF INTERNATIONAL BUSINESS AND MANUFACTURING STRATEGY PERSPECTIVES. 8(2), 109-132. https://doi.org/10.1111/j.1937-5956.1999.tb00365.x

C. Potts, J. Whitehead (2001) Workload balancing and loop layout in the design of a flexible manufacturing system. 129(2), 326-336. https://doi.org/10.1016/s0377-2217(00)00230-7

Avorty Chakr (2009) Improving distribution operations: Implemen-tation of material handling systems. 89-106.

Kadokawa Kazuo (2011) Infrastructure support and new plant formation: A factor analysis approach Journal of Geography and Regional Planning. 4(4), 231-242.

John Thornton (1974) Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings. 11(4), 666-670. https://doi.org/10.1116/1.1312732

Kumar, Suresh (2008) Production And Operations Management New Age International (P) Limited.

Y. Monden (1983) Toyota Production System.

Karande Prasad, Shankar Chak, Raborty (2012) Material Handling Equipment Selection Using Weighted Utility Additive Theory , Journal of Industrial Engineering. 2013, 1-9.

M. Piore, C. Sabel (1984) The Second Industrial Divide.

M. Porter, D. Yegin (2006) National economic strategy: an assessment of the competitiveness of the Libyan Arab Jamahiriya.

R. Vaidya, P. Shende, N. Ansari, S. Sorte (2013) Analysis Plant Layout for Effective Production. 2(3).

Robin Liggett (2000) Automated facilities layout: past, present and future. 9(2), 197-215. https://doi.org/10.1016/s0926-5805(99)00005-9

Saifallah Benjaafar, Mehdi Sheikhzadeh (1997) Design of Flexible Plant Layouts with Queueing Effects.

S. Anil, N. Kumar, Suresh (2008) Production and operation management. 2, 22-32.

Semih Onut, Selin Kara, Sinan Mert (2009) Selecting the suitable material handling equipment in the presence of vagueness. 44(7-8), 818-828. https://doi.org/10.1007/s00170-008-1897-3

Shubin John, A., H. Madeheim (1986) Plant Layout.

Sienny Sujono, R. Lashkari (2007) A multi-objective model of operation allocation and material handling system selection in FMS design. 105(1), 116-133. https://doi.org/10.1016/j.ijpe.2005.07.007

Uttapol Smutkupt, Sakapoj same, Plant Simulation (2009) Vol II, IMECS 2009.

G. Vieira, G. Pasa, M. Borsa, G. Milan, A. Pandolfo (2011) Materials Handling Management: a Case Study. 4(2), 19-30.